THE GSM ZONE and the NET Home Improvement Why Is My Heat Pump Running on Backup Heat?

Why Is My Heat Pump Running on Backup Heat?

On a cold Florida morning, you might see “aux heat” on your thermostat. Sometimes that’s normal. Other times, it’s a sign your system needs help.

Here’s how to tell the difference, and what to check before you call for a repair.

What Aux Heat Means

A heat pump moves heat from the outdoor air into your home. When it can’t keep up, backup heat turns on. In many Florida homes, that backup is a set of electric heat strips inside the indoor unit.

When Backup Heat Is Normal

•       On the coldest nights of the year.

•       For a short time during a defrost cycle, while the system melts frost off the outdoor coil.

•       Right after you raise the thermostat a lot at once.

When It’s a Warning Sign

•       Aux heat runs for hours on a mild night.

•       Your home never reaches the temperature you set.

•       Your power bill jumps, but the weather didn’t change much.

Quick Checks You Can Do

1.    Check the mode. Make sure the thermostat is set to heat, not emergency heat. Emergency heat runs only the backup heat.

2.    Check the thermostat’s heat pump settings. Many smart thermostats have a setting that controls when aux heat can run. On a Google Nest, it’s called Heat Pump Balance. Google says the default is Max Comfort, and Max Savings tells the thermostat to use aux heat as little as possible.

3.    Check the filter. A clogged filter cuts airflow and makes the system work harder.

4.    Check the breakers. If one has tripped, you can reset it once. If it trips again, leave it off and call a pro.

5.    Check the outdoor unit. Clear away leaves, mulch and plants so air can flow.

When to Call a Pro

If those checks don’t fix it, it’s time for a technician. The cause could be a failing part, a refrigerant leak or a thermostat problem.

Homeowners in Seminole County can call Infinite Air HVAC for heat pump repair. Its phones are answered 24/7, with no holiday closures. The $90 service call covers finding the problem, and it goes toward the repair.

Why a Fast Fix Saves Money

When your system leans on its backup heat, your bill can climb fast.

Florida Power & Light says aux heat can add up to $15 a day to your bill if it runs more than 12 hours a day. That estimate is based on a 7.5 kW strip heater. FPL also says heating can use two to three times more energy than cooling, and that even a few cold nights in a row can push energy use up.

Not every home near Lake Mary is on FPL. Some are served by Duke Energy, so check your bill to see which company serves you.

Tips to Keep Backup Heat Off

•       Raise the thermostat no more than two degrees at a time. FPL says bigger jumps can turn on aux heat by accident.

•       Pick a comfortable setting. FPL says every degree below 68 could save up to 5% on heating costs.

•       Keep your filter clean and the outdoor unit clear. Check the filter more often during cold snaps.

•       Don’t leave emergency heat on longer than you need it.

Questions to Ask Your Technician

•       What caused the problem? Ask the tech to show you, if they can.

•       Is my thermostat set up the right way for a heat pump?

•       Is this a one-time repair, or a sign of a bigger issue?

•       What will the repair cost before any work starts?

Good answers help you decide whether to repair your system or start planning for a new one.

Aux heat on a cold night is normal. Aux heat all the time isn’t. A few quick checks can help, and a fast repair can keep a small problem from turning into a big bill.

Related Post